Cut Mix 150

Dragon Pharma
Compound Profile
Active substancesMast P 50 + Test P 50 + Tren Ace 50 mg/mL Total concentration150 mg/mL Pack10 mL vial CategoryShort-Ester Cut Blend Cycle length6-10 weeks
Product Data
Lab potency148.41 mg/mL 98.9% Half-life (all esters)~3 days (propionate / acetate) Injection frequencyEOD Clearance5-7 days post-last injection Standard dose150 mg EOD = 1.0 mL EOD
Available Domestic
$72.00
$72.00
In Stock
Manufacturer Dragon Pharma
Brand Cut Mix
Substance Drostanolone Propionate
Concentration 150 mg/ml
Pack Size 10 ml
Shipping

Dragon Pharma Cut Mix 150 combines Drostanolone Propionate, Testosterone Propionate, and Trenbolone Acetate at 50 mg each per mL in a 10 mL vial - a short-ester three-compound blend for aggressive Cut and Condition phases where fast response, daily injection control, and 5-7 day clearance are the priority.

Dragon Pharma Cut Mix 150 delivers all three compounds through short esters, producing serum peaks within 24-48 hours of injection and full clearance within one week of the last dose. This pharmacokinetic profile makes it the fast-control option within the Dragon Pharma cutting blend lineup, selected when rapid response and short clearance windows matter more than injection frequency convenience.

Dragon Pharma Cut Mix 150 - Compound Breakdown and Short-Ester Profile

Each mL of Cut Mix 150 delivers three compounds in equal 50 mg portions, all through fast-clearing propionate or acetate esters. Lab-verified batch #CA2Q17 (March 2026) confirmed the per-component breakdown at 148.41 mg/mL total, 98.9% of label claim.

Component Label (per mL) Batch #CA2Q17
Drostanolone Propionate 50 mg 47.87 mg
Testosterone Propionate 50 mg 51.65 mg
Trenbolone Acetate 50 mg 48.89 mg
Pharmacokinetic Profile
Half-life (all 3 esters)~3 days (propionate / acetate) Tmax24-48 hours post-injection Injection frequencyEOD or ED Clearance5-7 days after last injection

The propionate and acetate esters across all three components synchronize release and clearance. There is no mismatch between a slow-clearing drostanolone fraction and a faster trenbolone fraction - all three peak and decline on the same 3-day timeline, requiring consistent EOD or ED injections to maintain stable serum levels.

Dragon Pharma Cut Mix 150 - Janoshik Lab Verification

Batch #CA2Q17 of Dragon Pharma Cut Mix 150 was independently tested by Janoshik on March 25, 2026. The analysis returned a total concentration of 148.41 mg/mL at 98.9% of label claim, with per-component breakdown confirming all three actives within normal manufacturing tolerance.

Lab Result - Batch #CA2Q17
Testing labJanoshik Test dateMarch 25, 2026 Label claim150 mg/mL Found148.41 mg/mL 98.9% BreakdownMast P 47.87 / Test P 51.65 / Tren Ace 48.89

All three actives were detected. Drostanolone propionate returned 47.87 mg versus the 50 mg label, testosterone propionate 51.65 mg, and trenbolone acetate 48.89 mg - consistent with a well-manufactured multi-compound blend within the expected analytical tolerance range.

Cut Mix 150 Training Effects - Fast Response Conditioning

The short ester profile delivers measurable conditioning feedback within the first week of injection, significantly faster than the enanthate-based cut blend. Drostanolone drives tissue hardness and suppresses estrogenic activity at the receptor level. Testosterone Propionate maintains lean tissue under caloric deficit and supports training output. Trenbolone Acetate accelerates nutrient partitioning and pushes conditioning density ahead of what testosterone and drostanolone alone produce.

Visual feedback begins appearing within days of stable serum levels being established, making Cut Mix 150 the faster-feedback option within cycles structured through Cycles by Goal. This rapid response also means side effects emerge quickly if dose exceeds individual tolerance - daily monitoring of blood pressure and sleep quality is standard from the first week.

Dragon Pharma Cut Mix 150 Dosage - EOD Volume at 150 mg/mL

At 150 mg/mL, each mL of Cut Mix 150 delivers 50 mg each of all three compounds. EOD administration maintains stable serum levels across the short propionate/acetate half-life. Standard cycles run 6-10 weeks.

Goal Per Injection (EOD) Volume (150 mg/mL)
Introductory 75 mg EOD 0.5 mL EOD
Standard 150 mg EOD 1.0 mL EOD
Advanced 225 mg EOD 1.5 mL EOD
High-output 300 mg EOD 2.0 mL EOD

150 mg EOD (1.0 mL EOD) delivers approximately 525 mg/week total blend - 175 mg/week each of Mast P, Test P, and Tren Ace. This is the most common structured cutting protocol with Cut Mix 150. Daily injection at 1.0 mL ED (1050 mg/week) is used only in high-output short phases of 4-6 weeks with active cardiovascular monitoring throughout.

Cut Mix 150 Stacks - Best Short-Ester Cutting Combinations

Cut Mix 150 provides the three-compound short-ester cutting base. Stacks add specific finishing, fat oxidation, recovery, or endocrine support depending on phase structure and individual priority.

Stack Goal Duration
Cut Mix 150 + Anavar 10 Clean strength and hardness overlay 6-10 wk
Cut Mix 150 + Clenbuterol Intensified fat oxidation during cut push 2-4 wk add-on
Cut Mix 150 + Propionat 100 All short-ester setup, maximum cycle control 6-10 wk
Cut Mix 150 + Ipamorelin Recovery and sleep quality during demanding phases 6-10 wk

Cut Mix 150 Side Effects and Cycle Management

Cut Mix 150 contains trenbolone acetate as one-third of the blend. At EOD dosing, blood pressure elevation and sleep disruption are the primary management targets from week one. Because trenbolone acetate clears in 3 days, dose adjustments take effect rapidly - a meaningful advantage over longer-ester trenbolone when side effects require correction mid-cycle. Prolactin elevation from the trenbolone component may require monitoring in sensitive individuals, particularly at doses above 150 mg EOD.

Drostanolone propionate's anti-estrogenic tissue activity reduces the need for an aromatase inhibitor when testosterone is kept at 50 mg per mL dose range, but complete estrogen management still depends on total weekly testosterone dose, individual aromatase activity, and blood work confirmation.

PCT After Dragon Pharma Cut Mix 150

The short propionate and acetate esters in Dragon Pharma Cut Mix 150 clear significantly faster than enanthate-based compounds. All three components approach full clearance within one week of the last injection, opening the PCT window much earlier than long-ester alternatives.

Clearance Timeline - Propionate / Acetate (3-day half-life)
Day 3~50% cleared (1 half-life) Day 5~75% cleared Day 5-7Essentially clear - PCT window opens

PCT can begin 5-7 days after the last Cut Mix 150 injection. This is the primary practical advantage of the short-ester format over Cut Long 300: cycle-to-cycle turnaround is significantly faster, and any mid-cycle correction in dose or compound takes effect within days rather than weeks.

Dragon Pharma Cut Mix 150 Health Support

Trenbolone acetate at EOD doses requires active blood pressure management from the start of the cycle. The fast ester means side effects emerge quickly, making early intervention more effective than reactive management later in the cycle.

Blood pressure control uses Sartel as the primary option. Lipid profile support during the cut phase may include Atorlip. Prolactin management from the trenbolone fraction uses Caberlin when indicated by blood work. Sleep quality support with DSIP addresses trenbolone-driven neurological stress during high-demand cutting phases. All of these fall within the MedRX category used in structured aggressive cycles.

Explore More

Browse additional cutting strategies and cycle setups in the articles section, or explore the full Cut and Condition catalog for additional compounds to build around Cut Mix 150.

Key Takeaways
  • Dragon Pharma Cut Mix 150 is a three-compound short-ester blend at 150 mg/mL: Drostanolone Propionate 50 mg, Testosterone Propionate 50 mg, and Trenbolone Acetate 50 mg per mL, 10 mL vial.
  • Janoshik lab test (batch #CA2Q17, March 2026) confirmed 148.41 mg/mL = 98.9% potency, with per-component breakdown: Mast P 47.87 mg, Test P 51.65 mg, Tren Ace 48.89 mg - all three actives within manufacturing tolerance.
  • The propionate and acetate esters synchronize all three components to a 3-day half-life, requiring EOD injection and producing full clearance 5-7 days after the last dose.
  • Standard dose is 150 mg EOD (1.0 mL EOD), delivering approximately 525 mg/week total blend across 6-10 week cutting cycles. Introductory use starts at 75 mg EOD (0.5 mL EOD).
  • Drostanolone propionate's anti-estrogenic tissue activity reduces water retention and may lower aromatase inhibitor requirements when testosterone is kept within the blend's 50 mg per injection baseline.
  • PCT starts 5-7 days after the last injection, significantly faster than long-ester cutting blends. This short clearance window allows tighter cycle-to-cycle planning and faster mid-cycle dose corrections if needed.
Please log in to write review.
  1. dmoney731
    April 27, 2026
    this mix is nasty good for cutting lol more veins, tighter look, and workouts still feel strong
  2. zacko_5
    March 28, 2026
    Cut Mix got me looking drier pretty fast, strength stayed up even while eating less
What is Cut Mix 150?

A short-ester blend of Mast P, Test P, and Tren A aimed at dry, responsive cutting.

Why short esters?

Faster adjustments and steadier look during tight phases.

Is it only for cutting?

Primarily cutting/recomp; can add lean mass with tight nutrition.

Do I need an AI?

Labs and symptoms decide; use Aromasin/Arimidex only if indicated.

How to keep it predictable?

One change at a time, routine labs, disciplined sleep and hydration.